Introducing The Human Connection Challenge: Season 1
Starting today we will begin releasing a series of all-new Challenge Labs. Each month you’ll be given the chance to showcase your cybersecurity skills across a range of topics and climb the Season 1 Leaderboard, with the chance to win kudos and rewards along the way.The Human Connection Challenge Lab 1: Basic OS Skills - Walkthrough Guide (Official Version)
In this walkthrough, I'll share some strategies for efficiently completing the lab, based on my perspective as the author. Remember, there are often multiple ways to approach a challenge, so if you used a different method and succeeded, that's perfectly fine! The goal is to learn, and I hope these notes help clarify any steps and reinforce key concepts for the next challenge.The Human Connection Challenge Lab 1: Basic OS Skills – Walkthrough Guide (Community Version)
This is a walkthrough guide written by one of our community members, who offered to give their perspective on the challenge. Interestingly, they approached this challenge by completing some of the tasks in the graphical user interface (GUI) instead of the command line.Human Connection Challenge: Season 1 – Scanning Walkthrough Guide (Official Version)
Time’s Up! Congratulations to everyone who completed Lab 2: Scanning from the Human Connection Challenge: Season 1. In this walkthrough, I'll share some strategies for efficiently completing the lab, based on my perspective as the author. Remember, there are often multiple ways to approach a challenge, so if you used a different method and succeeded, that's perfectly fine! The goal is to learn, and I hope these notes help clarify any steps and reinforce key concepts for the next challenge. This challenge has now ended, but the lab remains available for practice. While prizes are no longer up for grabs, you can still complete the lab and use this walkthrough guide for support if needed. I’ve also used placeholders in some of the commands that would give away an answer directly, so if you see anything enclosed in angle brackets, such as <name server>, please make sure you replace it with the actual value, such as nameserver. With all that considered, let's get started. Overview Task: Identify the name server records of tinytown.bitnet. 1. What is the IP of the first name server for tinytown.bitnet? You’ll first need to open a Terminal on the Kali desktop. Next, you’ll need to query the DNS Server IP (found in the Machines panel) about the tinytown.bitnet domain using the nslookup (Name Server Lookup) tool. You’re specifically looking for NS (Name Server) records, so you can use the -type=ns parameter with nslookup to specify this: nslookup -type=ns tinytown.bitnet [DNS Server IP] The output of this command will return two name servers for the domain labelled with 1 and 2. Your next step is to identify what IP address is associated with the first name server (1). To do this, you can use nslookup along with the name server, domain, and DNS Server IP: nslookup <name server>1.tinytown.bitnet [DNS Server IP] This command will then return an IP address for the name server. 2. What is the IP of the second name server for tinytown.bitnet? As you’ve already identified both name servers, you’ll just need to run the previous command, except with the second (2) name server: nslookup <name server>2.tinytown.bitnet [DNS Server IP] You’ll then find the IP address associated with it. Task: Identify port service information for Target 1. 3. What service version is running on port 53? A network scanning tool like Nmap can help you identify the service version running on a specific port. To do this with Nmap, you can use the -sV option for service detection: nmap -sV [Target 1 IP Address] The output will show what service version is running on port 53. 4. What is the full service banner of port 22? There are a couple of ways to find the full service banner of port 22 – such as with Nmap or Netcat. If you’re using Nmap, you can modify the previous command to include the “banner” script along with the port number: nmap -sV -script=banner [Target 1 IP Address] -p22 The command line will then display the service banner from port 22. You can alternatively use netcat to manually connect to the SSH server. When a client connects, Netcat may present a banner that contains version information. To use Netcat, you’ll need the nc command along with the Target 1 IP address and specify you want to connect to port 22: nc [Target 1 IP Address] 22 When you run this command, the banner appears before the terminal hangs. Task: Identify a token on one of the ports. 5. What is the token? With the previous Nmap command, you initially found that three ports were open on Target 1. However, you’ll need to do a more thorough network scan to find another open port, one not initially found with the previous scans. To do this, you can expand your port scan to cover a much wider range by using Netcat to scan for open ports from 1 through 9000: nc -zvn <Target 1 IP Address> 1-9000 Here, -z will scan for listening services but won’t send any data, -v is verbose mode, which provides more detailed information, and -n tells Netcat not to resolve hostnames via DNS. This command will reveal a fourth open port. Now, you can use Netcat to connect to this port: nc <Target 1 IP Address> <open port> The token will then be displayed in the terminal. Task: Scan the TLS configuration on Target 2. 6. How many protocols are enabled? To scan for SSL/TLS configurations, you can use the sslscan tool. By default, sslscan scans port 443 and will return supported server ciphers, certificate details, and more. You can use sslscan like this: sslscan <Target 2 IP Address> The returned output will be verbose, but you can find and count the number of enabled protocols under the SSL/TLS Protocols subheading. 7. Name an enabled protocol. Using the previous output, name one of the enabled protocols. 8. What exploit are the protocols NOT vulnerable to? Using the same output, scroll down through the results until you find a subheading that’s named after a vulnerability and contains a similar string to: <Protocol> not vulnerable to <vulnerability name> The vulnerability has the same name as the subheading. Task: Identify and extract information from an SMB share on Target 3. 9. What Disk shared directory can you access? To extract information from an SMB (Server Message Block) share, you can use the smbclient tool. First, you’ll need to list the SMB shares on the target using the -L flag (the list/lookup option) with: smbclient -L //<Target 3 IP> You’ll then be prompted for a password, but you can press Enter to skip this. A list of SMB shares will then be displayed, three of which are shown to be a Disk type, so you know the answer will be one of these. You can now begin to go through the list and try to connect to the shares with: smbclient //<Target 3 IP>/<Sharename> However, this time when you’re prompted for a password and you press Enter, you might encounter a message when you try and connect to a share: NT_STATUS_ACCESS_DENIED If you attempt to connect to all shares, you’ll find you can connect to one share without a password. You’ll then be greeted with the following prompt to show the successful connection: smb: \> 10. What is the token stored in the directory? Now that you’re connected, you can execute commands to interact with the SMB share. If you run ls, you’ll find a token.txt file in the current directory. You can then download the file from the share onto your local machine with: get token.txt On the Kali desktop, open the Home folder and the token.txt will be inside. Open this file and find the token. 11. What is the username stored in the directory? After you’ve run ls in the SMB share, you’ll find not only token.txt, but also a file named creds.txt. Use the same command as you just did previously to download the file onto your machine: get creds.txt This file will also be downloaded to the Home folder, where you can find a username and password. Task: Identify open services on Target 3. Task: Connect to Target 3 with the previously found credentials. 12. What is the token stored in the user's /Documents directory? For this final task, you first need to scan the target using Nmap. You’ll find that if you attempt to scan the target without using the -Pn flag, you’ll get a response saying that the host seems down. However, if you run Nmap with -Pn, you’ll find some ports are open: nmap -Pn <Target 3 IP Address> However, the ports returned from this command don’t offer a way to connect to the target. You’ll also need to scan the 6000 most popular ports: nmap -Pn --top-ports 6000 <Target 3 IP Address> These results will now show two additional ports are open regarding the Web Services Management (Wsman) protocol, which is used to communicate with remote machines and execute commands. One of the tools that implement this protocol is Windows Remote Management (WinRM) which is Microsoft’s implementation of Wsman. Knowing this, you can now use Metasploit to interact with the target. In your terminal, run: msfconsole Once loaded, you can use the the following auxiliary module to connect to a system with WinRm enabled and execute a command with: set cmd ls You’ll then need to set the following options, using the credentials you found in the creds.txt file: set username <username> set password <password> set rhosts <Target 3 IP Address> Next, you need to set the cmd option with the command you want to run. If you use the ls command, you’ll be able to find what out files are in the directory you connect to: set cmd ls With all the options set, you can now run the module: run The results of the executed command will be printed on the screen and also saved to a directory, but both show the existence of a token.txt file in the current directory. You can now set the cmd option to type token.txt in Metasploit: set cmd type token.txt Once set, use the run command to send the updated command: run The contents of token.txt will then be displayed on the screen and outputted to a file. Tools For this challenge, you’ll use a range of tools including: Nslookup Nmap Netcat Sslscan Smbclient Metasploit Tips You can use different tools and parameters within those tools to scan for and find information, so don’t be afraid to try out a few different things! If you want to learn more about some of the tools within this lab, take a look at the following collections: Reconnaissance Nmap Infrastructure Hacking Introduction to Metasploit Post Exploitation with Metasploit Conclusion The steps I’ve laid out here aren’t the only way to find the answers to the questions, as long as you find the answer, you did it – well done! If you found another way to find some of these answers and think there’s a better way to do it, please post them in the comments below! I hope you enjoyed the challenge and I’ll see you for the next one.Human Connection Challenge: Season 1 – Web Exploitation
In this walkthrough, I'll share some strategies for efficiently completing the lab, based on my perspective as the author. Remember, there are often multiple ways to approach a challenge, so if you used a different method and succeeded, that's perfectly fine! The goal is to learn, and I hope these notes help clarify any steps and reinforce key concepts for the next challenge. This challenge has now ended, but the lab remains available for practice. While prizes are no longer up for grabs, you can still complete the lab and use this walkthrough guide for support if needed. I’ve also used placeholders in some of the commands that would give away an answer directly, so if you see anything enclosed in angle brackets, such as <username>, please make sure you replace it with the actual value, such as user1. With all that considered, let's get started. Overview Task: Using the Firefox browser, navigate to The Happy Teeth Company web application, found at http://the-happy-teeth-company.bitnet. Task: Identify a directory on the web application that's disallowed to web crawlers. What is the name of the directory? On the Kali desktop, open the Firefox application and enter http://the-happy-teeth-company.bitnet into the browser to navigate to the Happy Teeth Company website. The key phrase in this task is “web crawlers”, which are also referred to as robots. The robots.txt page defines areas that shouldn’t be accessed by web crawlers, and reveals areas that aren’t intended for normal users to access, making it a simple but effective tool for directory discovery. To find what directory is disallowed to web crawlers, add /robots.txt to the end of the website URL: http://the-happy-teeth-company.bitnet/robots.txt You’ll find the directory name on this page. Task: Identify a login page that's not directly accessible from the web application's main site. What is the path of the page? To find the login page, you’ll need to open Terminal on the Kali Desktop. Then, you’ll need to use the Dirbuster tool with a wordlist to brute force any hidden pages that aren’t listed or linked from the main site. Wordlists for dirb (the command line version of Dirbuster) can be found in the /usr/share/dirb/wordlists directory on the Kali desktop. The syntax for the dirb command is: dirb http://the-happy-teeth-company.bitnet /usr/share/dirb/wordlists/small.txt This command will return a single directory. You’ll then be able to navigate to this URL and find a login page. Identify a username that's been mistakenly left on the web application. What is the username? For this question, you’ll need to navigate to the website’s main homepage, then right-click and select View Page Source. From here, scroll down the page until you see a comment that’s highlighted in red text that contains the username: <!---- [Comment] --> Task: Use a password cracking tool with the wordlist /usr/share/wordlists/metasploit/burnett_top_1024.txt to find the password for the user. What is the user's password? You can crack the user’s password using the Hydra tool and some specified options. Together, the command run in the Terminal should look something like this: hydra -l <username> -P /usr/share/wordlists/metasploit/burnett_top_1024.txt the-happy-teeth-company.bitnet -f http-post-form "/<login-page>:username=^USER^&password=^PASS^:F=invalid" This command first specifies the login name as the found username (-l <username>), the wordlist (-P /usr/share/wordlists/metasploit/burnett_top_1024.txt), the target (the-happy-teeth-company.bitnet), to quit when it finds one valid password combination (-f), and that the target page is an HTTP POST form. Next, it tells Hydra that the login page to attempt the credentials on (the previously found login page) and the form data sent will replace ^USER^ with the username and ^PASS^ with a password from the wordlist. If the server replies containing the word invalid, this means the login attempt failed. When you run this command, Hydra will attempt to log in to the page using the username and each password in the wordlist. If you want to view this process in real time with each password being attempted, you can also add the -V parameter to the end of the command for the verbose output. Hydra will successfully crack the user’s password a minute or so after running the command. Task: Log in to the previously found login page with these credentials. What is the token on the dashboard? Navigate to the previously found login page and enter the username and cracked password. Click Login, and the new page will reveal a token. Task: Identify a SQL injection vulnerability on the web application that reveals stored usernames and passwords in the error message. What is the username beginning with M? On the top-right of the homepage, you’ll find a link to the Members Login page. If you attempt to log in with a random username and password, an error message will display, stating that the user isn’t found. To find what else this error message could inadvertently display, you can inject an always true SQL query into the Username field: 'or'1'='1 Since '1'='1 is always true, the error message will return all rows from the queried SQL table if the field is vulnerable. After entering the SQL query, enter any password and click Login. When the page reloads, usernames will be displayed in the error message, and one will begin with M. What’s the user's password? Now you know that the Username field is vulnerable to SQL injection, you can manipulate the query to return other information from the database. Using the username you found beginning with M, you can change the SQL query to: ' or username='<username> Because you know an existing username, this condition will return as true. After entering a password and clicking Login the user’s password will display in the error message. Task: Identify a reflected XSS vulnerability on the web application that reveals a token in the error message. What is the token? At the top of the homepage, click on the Join Us Today button or scroll down until you get to the section on Practice Membership and Treatments and click Enquire Today. Both of these buttons will direct you to a registration page. This page contains a number of fields on a form, including name, email address, and street address. From the task, you know you’re looking for a reflected XSS vulnerability, so you can enter the following payload into the fields to test for XSS: <script>alert("xss")</script> Navigate through each field and test the payload by clicking Register Now until you find that the Phone Number field is vulnerable and reflects the “xss” message. Once you see this, click OK to close the window and find the token in the error message underneath the Register Now button. Task: Identify a file inclusion vulnerability on the web application. Task: Use directory traversal techniques to read the file token.txt. What’s the token? Navigate back to the main homepage and scroll down until you find the newsletter section. Underneath the Subscribe Now button, you’ll find a link to View Our Most Recent Newsletter, which you can click. You’ll now be shown a newsletter PDF file which appears in the URL as: http://the-happy-teeth-company.bitnet/view?file=newsletter.pdf This indicates that the application could be dynamically loading the file in the URL “file” parameter. To test this, you can manipulate this parameter to see if it’s vulnerable to a local file inclusion (LFI) exploit and will load other files – such as token.txt. In the URL, change the “file” parameter to: http://the-happy-teeth-company.bitnet/view?file=../../token.txt Press Enter, and a new page will load with a token. Tools This challenge primarily relies on your skills in web application exploitation and only requires two tools: Dirbuster for directory enumeration and Hydra for password cracking. Tips When testing for web application vulnerabilities, remember that vulnerabilities may reside in any part of the application. Subtle elements that appear unimportant could prove exploitable if they neglect to handle inputs securely. So make sure you check all user input forms and any buttons or links that direct you to different parts of the application. If you want to learn more about some of the tools within this lab, take a look at the following lab collections: Secure Testing – Beginner Credential Access SQL Injection Basics Cross-Site Scripting (XSS) Conclusion The steps I’ve laid out here aren’t the only way to find the answers to the questions. As long as you find the answers, you did it – well done! If you think there’s a better method to find some of the answers than what I’ve described above, please post it in the comments below! I hope you enjoyed the challenge and I’ll see you for the next one!
